Oven Repair in Edmonton

Common Oven Problems We Fix

Gas vs Electric Oven Repairs

Electric Oven Repairs

Electric ovens use bake and broil elements to generate heat. The bake element sits at the bottom of the oven cavity, and the broil element sits at the top. Both can burn out — the failure is usually visible as a crack, hole, or burnt spot in the element coil. When an element fails, the oven either doesn't heat at all or only heats from one direction, leading to uneven cooking.

The oven temperature sensor is another common failure point. This thin probe inside the oven cavity measures temperature and sends feedback to the control board. When it drifts or fails, the oven can run 25 to 50 degrees off its set temperature — often for months before anyone notices, because the food results change gradually. Sensor replacement is a straightforward same-day repair.

Gas Oven Repairs

Gas ovens use an igniter to light the burner. The igniter glows bright orange to heat a sensor that opens the gas valve. When the igniter weakens, it still glows — but not hot enough to open the valve. The oven clicks on, the igniter glows for 90 seconds, and nothing lights. This is the most common gas oven failure we see in Edmonton.

Gas surface burners on a range use a spark igniter to light the flame. When a burner won't light, the cause is usually a dirty or cracked igniter, a blocked burner cap, or a faulty spark module. We test each component to find the specific failure.

Gas Safety

If you smell gas near your oven or range, do not attempt to light it and do not turn on any electrical switches. Leave the home and call your gas provider from outside. Once the gas supply is confirmed safe, call us to assess the appliance. We are certified to work on gas appliances and can identify valve leaks, flexible connector issues, and gas control failures.

Wall Oven Repair in Edmonton

Built-in wall ovens from brands like Wolf, Thermador, Miele, Dacor, KitchenAid, and Bosch require the same repair expertise as freestanding ranges, with an additional complexity: they're built into the cabinetry, which means some repairs require more disassembly. We service all wall oven configurations including single, double, and steam wall ovens.

Convection Oven Repairs

Convection ovens add a fan and additional heating element to circulate hot air. When the convection fan motor fails, the oven still heats but loses the even-temperature advantage convection provides. Baked goods may brown on one side. The fan motor is a common repair on Wolf M-Series, Bosch 800 Series, and Miele ovens.

Temperature Calibration

An oven that consistently runs hot or cold is more common than most people realize. If your baked goods are always overcooked on the same setting, or your roasts take significantly longer than recipes suggest, calibration may be off. A properly calibrated oven should reach within 10°F of its set temperature and maintain it steadily. We test oven temperature accuracy as part of every oven service call and can recalibrate or replace the temperature sensor as needed.

Oven Brands We Service in Edmonton

• Wolf — Pro-style ranges, M-Series wall ovens, dual fuel models
• Thermador — Pro Harmony and Masterpiece ranges, wall ovens
• BlueStar — Open burner professional ranges
• Dacor — Modernist and Contemporary ranges and wall ovens
• Jenn-Air — Pro-style ranges, downdraft ranges, wall ovens
• KitchenAid, Whirlpool, Maytag — all freestanding and wall oven models
• Samsung, LG — freestanding and slide-in ranges
• Bosch — benchmark and 800 Series wall ovens and ranges
• Miele — built-in ovens and steam ovens
• GE, GE Profile, Café, Frigidaire, Electrolux — all models

Frequently Asked Questions